Unless otherwise stated this review is not affiliated with any other website nor has the review been authorised by the copyright company or indiviudal author. As of 17th July 2017 this encompasses every review within ZXSR. If you would like this or any other review removed from this website, please contact the website administrator here.

DK'Tronics Ltd
Not Known
1983
Hardware: Joystick
£22.95
£13
Unknown (Imported From Infoseek)
Not Applicable
Undetermined

Other Links


25
Chris Bourne

MORE FROM DK STABLE

AS ONE of the oldest suppliers of add-ons for the Sinclair market, DK'tronics has built up a reputation for good, basic, hardware. The latest additions to its range for the Spectrum - two joystick interfaces, a printer interface and a sound generator - do not break any new ground but are well designed and constructed.

All use a new, restyled, case which can be used with the Spectrum Plus and should also fit most full-sized keyboards. In addition, three of the four items have through connectors - a welcome change.

The less expensive joystick interface is Kempston/Sinclair compatible. It has two standard joystick sockets on the top, the left Kempston and the right Sinclair - keys 6, 7, 8, 9 and 0 for fire. Priced at £13 it should prove popular with arcade fanatics. It docs not have a through connector, and thus must be the last add-on attached.

For those who need a wider choice of keys the programmable interface at £22.95 could be the answer. It can be programmed using the tape provided or, when a game is running, via a switch on the top. The tape allows you to program any of the keys, including Shift and Enter, and to read two or more keys at once, so you can move diagonally and fire at the same time.

The printer interface is disappointing. It can drive any Centronics printer but it has disadvantages which make it a doubtful buy.

The software tape provided has two pieces of code on it, one for Epson compatibles and the other for the MCP 40. The Epson code is only 520 bytes long and redirects LPRINT and LLIST to the printer. A copy routine is included but only in one size and, when tested on an Epson printer, appeared to give a line feed which was out by 1/72in. The bottom two lines of the screen are not copied. The MCP code is 680 bytes long and includes a half-sized copy option as well as supporting the INK command.

For MCP 40 users the interface might well be a good buy at £39.95 but Epson or Seikosha users who want to use COPY should look carefully before buying.

The Sound Generator, priced £29.95, is based around the ever popular AY-3-8912 chip and includes a built-in amplifier and external speaker; it also amplifies the BEEP. The problem with this chip is that it is not one of the easiest to program, although thorough instructions are included that show you how to do this in Basic or code.

To overcome that, software is included on tape which allows you to write a tune in three-part harmony and replay it. You cannot alter the length of note - you have to enter two notes to double the length - nor edit a voice once it is entered; you are limited to 256 notes per voice.

The chip has 15 envelopes built in and a different one, and/or noise, can be assigned to each voice. That, again, is rather basic and reflects the age of the chip.

Although the chip is well known the problem has always been lack of support from software writers. DK'tronics is well placed to change this and some future releases will contain routines to drive the generator.

Not Rated